Skip to product information
1 of 2

IKI

S2-30 Power Booster by IKI

S2-30 Power Booster by IKI

Free UK Delivery Over £1500*
Regular price £ 478.46
Sale price £ 478.46 Regular price
View full details
Description

Description

The S2-30 Power Booster is an additional contactor unit that expands the maximum switching load of a sauna control unit, designed for IKI’s Pro-B3 and also compatible with the earlier Pro-B2. With a contact rating of 21 kW it lets these controllers run larger heaters than they can switch alone, and it can be used with any sauna control unit that provides a 230 V switch output for the safety and switching circuit. The booster runs on a 400 V three-phase supply, carries an IPX4 splash-protection rating, and must be installed by a qualified electrician with the power supply disconnected.

Features

  • Expanded switching load: Raises the maximum heater load a sauna control unit can switch.
  • 21 kW contact rating: Switches heater loads of up to 21 kW.
  • Pro-B3 and Pro-B2: Designed for the current Pro-B3 control unit and compatible with the earlier Pro-B2.
  • Wider compatibility: Suits any control unit with a 230 V switch output for the safety and switching circuit.
  • Splash protected: Rated IPX4 against splashing water.
  • Compact housing: Measures 250 × 224 × 75 mm for discreet installation alongside the control unit.
Technical Specification
Contact rating21 kW
Rated voltage400 V, 3N~
Frequency50 Hz
Protection classIPX4
Dimensions250 × 224 × 75 mm
Ambient temperature-10 °C to +40 °C
CompatibilityPro-B3 and Pro-B2 control units; any control unit with a 230 V switch output for the safety and switching circuit

Installation

Installation may only be performed by a qualified electrician or similarly qualified person, and the power supply must be disconnected before the booster is installed and connected. The installation manual in the Downloads tab and the regulations applicable at the installation location must be followed.

Brand

IKI Kiuas builds open-structured, large-stone-mass sauna heaters, hand crafted in Pieksämäki, Finland.

Ordering note

Check your heater model, heater output and controller generation before ordering; the booster is an addition to a compatible control unit such as the Pro-B3, not a controller in itself. Electrical installation must be carried out by a certified electrician.

Downloads
Delivery & Returns

Delivery

We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.

Returns

We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.

Warranty & Quality Promise

We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.

Related Products