Sauna Corner Mouldings and Edge Trims

When building your sauna it can be useful to cover the joins between wall panels and the ceiling, as well as in the corners of saunas. This is because they offer a neat clean finish line that remains consistent even if the cladding moves or cups over time.

Sauna cladding is prone to cupping and shrinking over time which can lead to gaps opening in the corners between the sauna walls and between the ceiling of the sauna and the sauna walls. Similarly, less careful carpenters or would-be DIY sauna installers might not get a clean cut on each board and a bead discreetly conceals this cut. A corner bead will help hold the cladding in place and give you a clean corner detail every time. 

Edge trims are an excellent way to cover external corners and joins between two lengths of sauna timber. These are usually found around window and door reveals but can also be on boxed-out areas around service risers. These sauna trims and mouldings are usually either L-shaped timber mouldings or flat cover mouldings. T mouldings are also used for covering joins in sauna wood timber cladding.

Finnmark's Collection of Sauna Corner Beads and Sauna Edge Trim Profiles include:

• KA-Moulding 14x60mm
• SI 25x25mm
• SI 15x18mm
• SI 14x30mm
• SHA 80x108mm
• SHA 54x135mm
• SHA 40x90mm
• SHA 40x140mm
• SHP 86x86mm
• SHP 68x68mm
• SHP 21x21mm
• SHP 15x45mm
• T-Moulding 17x32mm
• UK 12x42mm
• VÄ 21x42mm
• VÄ 28x28mm
• VÄ 28x42mm

Not all sauna trims are available in all sauna wood types but most designs can use a similar coloured wood type to supplement the installation as the visible portion of the mouldings is small. Browse our wide array of sauna wood corner beads, mouldings and trims above.