Ductstore
150mm/75mm Rectangular Ductwork 90° Square Bend
150mm/75mm Rectangular Ductwork 90° Square Bend
Couldn't load pickup availability
Description
Description
150mm 90° Square Bend (Depth: 75mm) – Horizontal
This 90° square bend turns a run of 150 × 75 mm rectangular ductwork through a right angle in the horizontal plane, changing direction from side to side while the duct stays flat against a ceiling or wall. It is made from galvanised mild steel and supplied with slip joint female connections at both ends (A and B), one of the standard methods for assembling rectangular duct. Where a run needs to join other ventilation equipment, sheet metal flanges can be used instead.
75mm 90° Square Bend (Depth: 150mm) – Vertical
This 90° square bend takes a run of 75 × 150 mm rectangular ductwork through a right angle in the vertical plane, turning the duct upward or downward where it needs to rise through a structure or drop to a grille or vent. Manufactured from galvanised mild steel, it comes with slip joint female connections at both ends (A and B), one of the standard methods of joining rectangular duct. Sheet metal flanges can be used instead where the run connects to other ventilation equipment.
Features
Technical Specification
| Specifications (Horizontal) | |
| Type | 90° square bend |
| Duct section (depth × width) | 150 × 75 mm |
| Orientation | Horizontal plane |
| Material | Galvanised mild steel |
| Connection A | Slip joint, female end |
| Connection B | Slip joint, female end |
| Brand | Ductstore |
Connections
Connections A and B refer to the connection methods used on either end of the bend. Doby frames and slip joints are standard connections for duct assembly. Sheet metal flanges are not a general connection method but can be useful when connecting to other ventilation equipment.
Ordering
If you are unsure this bend suits your ductwork, contact support@finnmarksauna.com before ordering.
| Specifications (vertical) | |
| Type | 90° square bend |
| Duct section (depth × width) | 75 × 150 mm |
| Orientation | Vertical plane |
| Material | Galvanised mild steel |
| Connection A | Slip joint, female end |
| Connection B | Slip joint, female end |
| Brand | Ductstore |
Connections
Connections A and B refer to the connection methods used on either end of the bend. Doby frames and slip joints are standard connections for duct assembly. Sheet metal flanges are not a general connection method but can be useful when connecting to other ventilation equipment.
Ordering
If you are unsure this bend suits your ductwork, contact support@finnmarksauna.com before ordering.
Downloads
Delivery & Returns
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.
Description
150mm 90° Square Bend (Depth: 75mm) – Horizontal
This 90° square bend turns a run of 150 × 75 mm rectangular ductwork through a right angle in the horizontal plane, changing direction from side to side while the duct stays flat against a ceiling or wall. It is made from galvanised mild steel and supplied with slip joint female connections at both ends (A and B), one of the standard methods for assembling rectangular duct. Where a run needs to join other ventilation equipment, sheet metal flanges can be used instead.
75mm 90° Square Bend (Depth: 150mm) – Vertical
This 90° square bend takes a run of 75 × 150 mm rectangular ductwork through a right angle in the vertical plane, turning the duct upward or downward where it needs to rise through a structure or drop to a grille or vent. Manufactured from galvanised mild steel, it comes with slip joint female connections at both ends (A and B), one of the standard methods of joining rectangular duct. Sheet metal flanges can be used instead where the run connects to other ventilation equipment.
Features
| Specifications (Horizontal) | |
| Type | 90° square bend |
| Duct section (depth × width) | 150 × 75 mm |
| Orientation | Horizontal plane |
| Material | Galvanised mild steel |
| Connection A | Slip joint, female end |
| Connection B | Slip joint, female end |
| Brand | Ductstore |
Connections
Connections A and B refer to the connection methods used on either end of the bend. Doby frames and slip joints are standard connections for duct assembly. Sheet metal flanges are not a general connection method but can be useful when connecting to other ventilation equipment.
Ordering
If you are unsure this bend suits your ductwork, contact support@finnmarksauna.com before ordering.
| Specifications (vertical) | |
| Type | 90° square bend |
| Duct section (depth × width) | 75 × 150 mm |
| Orientation | Vertical plane |
| Material | Galvanised mild steel |
| Connection A | Slip joint, female end |
| Connection B | Slip joint, female end |
| Brand | Ductstore |
Connections
Connections A and B refer to the connection methods used on either end of the bend. Doby frames and slip joints are standard connections for duct assembly. Sheet metal flanges are not a general connection method but can be useful when connecting to other ventilation equipment.
Ordering
If you are unsure this bend suits your ductwork, contact support@finnmarksauna.com before ordering.
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.
