
Description
Description
The Float IKI is a sculptural electric sauna heater designed by the renowned Finnish designer Eero Aarnio, its circular form recalling people gathered around a campfire. The outer casing is embedded in the lower bench so the heater appears to float in the room, and the surrounding lights, controlled by a wireless dimmer switch included in the delivery, set the mood of the sauna. With a 13.8 kW three-phase output and 160 kg of stones it heats large private or public saunas of 15–25 m³. A separate control unit is required and is not included: the heater is compatible with controllers such as the UKU Wi-Fi control unit, which manages heaters up to 18 kW. Each Float is made to order in Finland, so the order cannot be cancelled or returned once confirmed, and a sufficient quantity of sauna stones must be purchased separately.
Features
Technical Specification
| All models | |
| Type | Electric sauna heater (three-phase) |
| Design | Eero Aarnio for IKI Kiuas |
| Mounting | Embedded in the lower bench with the supplied embedding flange |
| Lighting | Integrated heater light with wireless Gira dimmer switch (included) |
| Heating time | 45–70 min |
| Recommended bathing temperature | 50–70 °C |
| Overheat protection | Temperature limiter cuts power at 139 °C |
| Connecting cable type | H07RN-F rubber cable (PVC-insulated cable must not be used) |
| Recommended stones | Kerkes ceramic around the elements; rough-cut olivine, olivine diabase or peridotite (50–100 mm) at the surface; sold separately |
| Float IKI 13.8 kW | |
| Output | 13.8 kW |
| Recommended room volume | 15–25 m³ |
| Stone capacity (max.) | 160 kg |
| Height | 825 mm |
| Diameter | 710 mm |
| Fuses | 3 × 20 A |
| Connecting cable | 5 × 6 mm² (single connection) or 2 × 5 × 2.5 mm² (two-way connection) |
| Safety clearance (above) | 1,200 mm from the top of the heater |
| Safety clearance (sides, upper casing) | 200 mm |
| Safety clearance (sides, lower casing) | 35 mm |
| Bench opening | 600 mm hole; 50 mm minimum gap to the casing, 80 mm recommended |
| Recommended lower bench height | 620–640 mm |
Installation
Installation and maintenance must be carried out by a certified electrician, with the electricity supply isolated at the fuse panel before any work begins. Under IEC 60364-7-703 and BS 7671:2018 an electric sauna heater does not have to be connected through an RCD, and for reliable operation the manufacturer recommends that the heater supply is not run through one; other electrical devices in the sauna room should be RCD protected. A local point of isolation covering all live conductors is recommended. The installation manual in the Downloads tab and local wiring regulations must be followed. The heater is connected with an H07RN-F rubber cable or equivalent (PVC-insulated cable is prohibited), the base unit is installed in an opening in the flooring with the outer casing embedded in the lower bench using the supplied flange, and a separate control unit is required.
Sauna stones
Sauna stones are not included and must be purchased separately. IKI recommends Kerkes ceramic interspace stones around the heating elements, with rough-cut olivine, olivine diabase or peridotite stones of 50–100 mm at the surface; soapstone, rounded or natural stones may only be used at the surface level. Lay the stones loosely so air can flow, and check their condition yearly.
Brand
IKI Kiuas is a Finnish specialist in open, large-stone-mass sauna heaters, hand-crafted in Pieksämäki by welders with decades of experience in stainless steel and black iron. Each heater is welded by hand and may show small tooling marks on the stainless steel rim.
Downloads
Delivery & Returns
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.
Description
The Float IKI is a sculptural electric sauna heater designed by the renowned Finnish designer Eero Aarnio, its circular form recalling people gathered around a campfire. The outer casing is embedded in the lower bench so the heater appears to float in the room, and the surrounding lights, controlled by a wireless dimmer switch included in the delivery, set the mood of the sauna. With a 13.8 kW three-phase output and 160 kg of stones it heats large private or public saunas of 15–25 m³. A separate control unit is required and is not included: the heater is compatible with controllers such as the UKU Wi-Fi control unit, which manages heaters up to 18 kW. Each Float is made to order in Finland, so the order cannot be cancelled or returned once confirmed, and a sufficient quantity of sauna stones must be purchased separately.
Features
| All models | |
| Type | Electric sauna heater (three-phase) |
| Design | Eero Aarnio for IKI Kiuas |
| Mounting | Embedded in the lower bench with the supplied embedding flange |
| Lighting | Integrated heater light with wireless Gira dimmer switch (included) |
| Heating time | 45–70 min |
| Recommended bathing temperature | 50–70 °C |
| Overheat protection | Temperature limiter cuts power at 139 °C |
| Connecting cable type | H07RN-F rubber cable (PVC-insulated cable must not be used) |
| Recommended stones | Kerkes ceramic around the elements; rough-cut olivine, olivine diabase or peridotite (50–100 mm) at the surface; sold separately |
| Float IKI 13.8 kW | |
| Output | 13.8 kW |
| Recommended room volume | 15–25 m³ |
| Stone capacity (max.) | 160 kg |
| Height | 825 mm |
| Diameter | 710 mm |
| Fuses | 3 × 20 A |
| Connecting cable | 5 × 6 mm² (single connection) or 2 × 5 × 2.5 mm² (two-way connection) |
| Safety clearance (above) | 1,200 mm from the top of the heater |
| Safety clearance (sides, upper casing) | 200 mm |
| Safety clearance (sides, lower casing) | 35 mm |
| Bench opening | 600 mm hole; 50 mm minimum gap to the casing, 80 mm recommended |
| Recommended lower bench height | 620–640 mm |
Installation
Installation and maintenance must be carried out by a certified electrician, with the electricity supply isolated at the fuse panel before any work begins. Under IEC 60364-7-703 and BS 7671:2018 an electric sauna heater does not have to be connected through an RCD, and for reliable operation the manufacturer recommends that the heater supply is not run through one; other electrical devices in the sauna room should be RCD protected. A local point of isolation covering all live conductors is recommended. The installation manual in the Downloads tab and local wiring regulations must be followed. The heater is connected with an H07RN-F rubber cable or equivalent (PVC-insulated cable is prohibited), the base unit is installed in an opening in the flooring with the outer casing embedded in the lower bench using the supplied flange, and a separate control unit is required.
Sauna stones
Sauna stones are not included and must be purchased separately. IKI recommends Kerkes ceramic interspace stones around the heating elements, with rough-cut olivine, olivine diabase or peridotite stones of 50–100 mm at the surface; soapstone, rounded or natural stones may only be used at the surface level. Lay the stones loosely so air can flow, and check their condition yearly.
Brand
IKI Kiuas is a Finnish specialist in open, large-stone-mass sauna heaters, hand-crafted in Pieksämäki by welders with decades of experience in stainless steel and black iron. Each heater is welded by hand and may show small tooling marks on the stainless steel rim.
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.









